Our heating films system operates on the principle of the red radiation emission.
Thermal energy is accumulated in the matter found in the radiation path
The heating film ensures uniform heat distribution on the entire surface.
OUR HEATING SYTEM
Our heating films do not require complicated hydraulic connections. It is an excellent alternative to traditional surface heating systems. This technology guarantees a wide range of applications and ease of installation as well as low investment costs. Unlike heating mats, we guarantee uniform heating distribution over the entire surface. They can be used as the main source of heating or as a support for other heating sources, increasing thermal comfort of the building.
WHY TO CHOOSE US?
Low investments cost
12-15£/m² heated surface
Low heating cost
Low cost due to 100% efficiency of surface heating
Reliability
No moving parts, no service needed. The vitality of the product up to 30 years
Ecological
No gas emission will be produced – clear air around your neighborhood
Comfort
Maintenance free system
Health
System provide optimal level of humidity and no does not dry out the air
WHERE YOU CAN USE OUR SYSTEM FILMS
Nowadays with the current possibilities of obtaining energy from photovoltaics, there is no limitation regarding to places of installation heating films, gaining the feeling of using a completely clean technology.
INSTALLATION
Heating films are usually applied under the paneled floors. This is definitely the easiest and fastest way to install surface heating. The layout diagram of the Felix heating system under panels is shown below.
1. Concrete layer
2. Insulation mat
3. Temperature sensor panels
4. Eco green house heating film
5. Vapour barrier foil
6. Floor panels
After we knew the energy demand in the area/room, we can start to distribution and unfold the film It is important to keep a minimum distance of 10 cm from the walls and furniture adjacent to the floor with a large surface, e.g. from cabinets or racks. You can find an example of the plan film deployment below. 
The film unfold like a carpet and should be cut in designated places.
Then electrical connections can be made. We recommend to create connections according to the diagram below.
1. Eco green house heating film
2. Power supply – phase
3. Temperature sensor
4. Room temperature controller
5. Power supply – neutral
6. Mains power supply
Electrical connections should be performed by a qualified electrician. At this stage, power cords are attached to the EGH heating films by crocodile clips. The clips are attached with special crimping pliers to the copper strips located on both sides of our heating films.
When the electrical connections are made, they should be thoroughly insulated with the self-amalgamating tape. The tape should be properly cut and attached on both sides of the connection. It is important to protect the film ends where there are no electrical connections. Paths for cables are cut in the insulation mat.
The floor temperature sensor needs to be installed under the heating film
The final step: Connect power cords and the temperature controller sensor, it is important to take measurements and conduct the last inspection of the installation.
SPECIFICATION
Model | Width | Thickness | Power | Force | Type | Max temp | Usage |
|---|---|---|---|---|---|---|---|
EX310T | 100cm | 0.338mm | 110W | 230V | Transparent film | 34°C | Floor |
EX305 | 50cm | 0.338mm | 110W | 230V | Milky Pet | 34°C | Floor |
EX305T | 50cm | 0.338mm | 110W | 230V | Transparent film | 34°C | Floor |
EX310 | 100cm | 0.338mm | 110W | 230V | Milky Pet | 34°C | Floor |
EX305 | 50cm | 0.338mm | 220W | 230V | Milky Pet | 55°C | Floor, walls, ceiling |
EX305T | 50cm | 0.338mm | 220W | 230V | Transparent film | 55°C | Floor |
EX310 | 100cm | 0.338mm | 220W | 230V | Milky Pet | 55°C | Floor, walls, ceiling |
OKONDOL | 100cm | 0.5mm | 220W | 230V | Composite film | 55°C | Ceramic tiles |
FEATURES OF HEATING FILMS EXCEL
There won’t be only one point overheating
No electrical overcharge
Protect against moisture accumulation
The most durable Milky PET film that you can find on the market
For everyone
ADVANTAGES OF HEATING FILMS EXCEL
Low investments and exploitation cost
Full safeness of users
Long wave infrared anions have positive effect on our health
No gas emission to atmosphere, very quiet during operations
You can always dismantle EXCEL heating films and install them in another place
OFFER
TYPE: Transparent film
The EX310 heating film version based on the transparent film. The principle of operation consists in the emission of red radiation beneficial for health. Heating films are an alternative and economical surface heating system with the possibility of installing as floor, wall or even ceiling heating.
Green Eco House heating films ensure uniform distribution of heating over the entire surface. Very good electrical insulation properties guarantee complete safety of use.
| Model | Width (cm) | Energy consumption | Thickness (mm) | Mb quantity /roll | Weight kg/roll | Temp. (°C) | |
| W/mb | W/m² | ||||||
| EX305 T | 110 | 110 | 110 | 0,338 | 100 | 25,4 | 34 |
TYPE: Transparent film
The EX310 heating film version based on the transparent film. The principle of operation consists in the emission of red radiation beneficial for health. Heating films are an alternative and economical surface heating system with the possibility of installing as floor, wall or even ceiling heating.
Green Eco House heating films ensure uniform distribution of heating over the entire surface. Very good electrical insulation properties guarantee complete safety of use.
| Model | Width (cm) | Energy consumption | Thickness (mm) | Mb quantity /roll | Weight kg/roll | Temp. (°C) | |
| W/mb | W/m² | ||||||
| EX305 T | 50 | 55 | 110 | 0,338 | 100 | 25,4 | 34 |
TYPE: Transparent film
The EX310 heating film version based on the transparent film. The principle of operation consists in the emission of red radiation beneficial for health. Heating films are an alternative and economical surface heating system with the possibility of installing as floor, wall or even ceiling heating.
Green Eco House heating films ensure uniform distribution of heating over the entire surface. Very good electrical insulation properties guarantee complete safety of use.
| Model | Width (cm) | Energy consumption | Thickness (mm) | Mb quantity /roll | Weight kg/roll | Temp. (°C) | |
| W/mb | W/m² | ||||||
| EX305 T | 50 | 110 | 220 | 0,338 | 100 | 25,4 | 34 |
TYPE: Milky PET
The principle of operation consists in the emission of red radiation beneficial for health. Heating films are an alternative and economical surface heating system with the possibility of installing as floor, wall or even ceiling heating.
Green Eco House heating films ensure uniform distribution of heating over the entire surface. Very good electrical insulation properties guarantee complete safety of use.
| Model | Width (cm) | Energy consumption | Thickness (mm) | Mb quantity /roll | Weight kg/roll | Temp. (°C) | |
| W/mb | W/m² | ||||||
| EX305 | 50 | 55 | 110 | 0,338 | 100 | 29 | 34 |
TYPE: Milky PET
The principle of operation consists in the emission of red radiation beneficial for health. Heating films are an alternative and economical surface heating system with the possibility of installing as floor, wall or even ceiling heating.
Green Eco House heating films ensure uniform distribution of heating over the entire surface. Very good electrical insulation properties guarantee complete safety of use.
| Model | Width (cm) | Energy consumption | Thickness (mm) | Mb quantity /roll | Weight kg/roll | Temp. (°C) | |
| W/mb | W/m² | ||||||
| EX310 | 100 | 110 | 110 | 0.338 | 100 | 48 | 34 |
TYPE: Milky PET
The principle of operation consists in the emission of red radiation beneficial for health. Heating films are an alternative and economical surface heating system with the possibility of installing as floor, wall or even ceiling heating.
Green Eco House heating films ensure uniform distribution of heating over the entire surface. Very good electrical insulation properties guarantee complete safety of use.
| Model | Width (cm) | Energy consumption | Thickness (mm) | Mb quantity /roll | Weight kg/roll | Temp. (°C) | |
| W/mb | W/m² | ||||||
| EX305 | 50 | 110 | 220 | 0,338 | 100 | 29 | 55 |
TYPE: Milky PET
The principle of operation consists in the emission of red radiation beneficial for health. Heating films are an alternative and economical surface heating system with the possibility of installing as floor, wall or even ceiling heating.
Green Eco House heating films ensure uniform distribution of heating over the entire surface. Very good electrical insulation properties guarantee complete safety of use.
| Model | Width (cm) | Energy consumption | Thickness (mm) | Mb quantity /roll | Weight kg/roll | Temp. (°C) | |
| W/mb | W/m² | ||||||
| EX310 | 100 | 220 | 220 | 0.338 | 100 | 48 | 55 |
TYPE: Composite film
Composite heating film 100cm wide. Film dedicated more strengthened to be used for expample under tiles.
Currently, these films have been improved. Production uses nanotechnology, which enables very precise film performance. OKondol consists of nine layers with different functions. The outer layer has an exceptional durability and perfectly protects carbon and electrically conductive strips. OKondol technology enables obtaining high temperatures, comfort of use and durability.
Model | Width (cm) | Energy consumption | Thickness (mm) | Mb quantity /roll | Weight kg/roll | Temp. (°C) | |
W/mb | W/m² | ||||||
OK410 | 100 | 220 | 220 | 0,5 | 75 | 42 | 55 |
Room Thermostat
Electromechanical wired room thermostat EBERLE RTR-E 3521.
Future proof design in combination with solid and reliable technology. Great price-quality relation. Thermostats Eberle RTR-E 3521 work great even in really difficult weather conditions
PARAMETERS
| Regulation range | From 5 to 30°C |
| Joint | 1 joint open-ended |
| Force | 230V / 50/60HZ |
| Power | Alternating current 10 mA…16(4)A; Direct current 100W |
| Histeresisk | ~0.5K |
| Casing protection class | IP 30 / isolation |
| Special features | 2-core cable |
| Dimensions | 75 x 75 x 27.5mm |
Room Thermostat
Wired room thermostat HEATTEC HTP200-E is equipped with LCD screen. Thermostat dedicated to electrical floor heating systems and to control heating devices. Thermostat is equipped with Floor temperature sensor.
DESCRIPTION
Thermostat HEATTEC HTP200-E is dedicated to control the temperature in commercial and residential buildings with special considerations to electrical floor heating systems
SPECIFICATIONS
Floor temperature sensor.
LCD screen with white/blue backlighting
Manual/automatic work mode
Keyboard lock.
Possibility of choose 3 weekly programs
Possibility of setting 6 time lapses for each program.
System memory.
Anti-freeze mode.
Differentiation temperature setting.
Easy to install and use.
Different sensor settings.
PARAMETERS
| Amperage | 16A for electrical heating |
| Force | 230V – 50/60HZ |
| Energy use | <0.3W |
| Working conditions | Temp 0 – 45°C ; humidity <85% |
| Storage conditions | Temp 0 – 55°C ; humidity <95% |
| Temperature options range | 5 – 60°C (Internal sensor) 5 – 99°C (External sensor) |
| Temperature controls range | 5 – 60°C |
| Control accuracy | +/- 1°C |
| Iteam thermo-expandable | Termisor NTC |
| Type of outside material | PC + ABS (Increased thermal resistance) |
| Installation method | Flush-mounted |
| Certificate CE (EMC i LDV) | EN55024, EN61000, EN60950 |
Room Thermostat
Wired room thermostat HEATTEC HTD100-E is equipped with touchscreen and floor temperature sensor.. Thermostat is dedicated to electrical floor heating systems.
DESCRIPTION
Thermostat HEATTEC HTD100-E is dedicated to control the temperature in commercial and residential buildings with special considerations to electrical floor heating systems
SPECIFICATIONS
Touchscreen
Floor temperature sensor.
LCD screen with white/blue backlighting
Manual/automatic work mode
Keyboard lock.
Possibility of choose 3 weekly programs
Possibility of setting 6 time lapses for each program.
System memory.
Anti-freeze mode.
Differentiation temperature setting.
Easy to install and use.
Different sensor settings.
PARAMETERS
| Amperage | 16A for electrical heating |
| Force | 230V – 50/60HZ |
| Energy use | <0.3W |
| Working conditions | Temp 0 – 45°C ; humidity <85% |
| Storage conditions | Temp 0 – 55°C ; humidity <95% |
| Temperature options range | 5 – 60°C (Internal sensor) 5 – 99°C (External sensor) |
| Temperature controls range | 5 – 60°C |
| Control accuracy | +/- 1°C |
| Iteam thermo-expandable | Termisor NTC |
| Type of outside material | PC + ABS (Increased thermal resistance) |
| Installation method | Flush-mounted |
| Certificate CE (EMC i LDV) | EN55024, EN61000, EN60950 |
Room Thermostat
Thermostat HEATTEC HTD200WIFI-E is equipped in legible touchscreen and WIFI module. We can control our heating system via WIFI using RM Heat app. Application is available for both IOS and Android systems. Thermostat is dedicated for electrical floor heating systems such as heating films. HEATTEC HTD200WIFI-E contains floor temperature sensor.
DESCRIPTION
Thermostat HEATTEC HTD200WIFI-E is dedicated to control the temperature in commercial and residential buildings with special considerations to electrical floor heating systems
SPECIFICATIONS
WIFI controlled
Application RM Heat for IOS and Android systems
Touchscreen
Floor temperature sensor.
LCD screen with white/blue backlighting
Manual/automatic work mode
Keyboard lock.
Possibility of choose 3 weekly programs
Possibility of setting 6 time lapses for each program.
System memory.
Anti-freeze mode.
Differentiation temperature setting.
Easy to install and use.
Different sensor
PARAMETERS
| Amperage | 16A for electrical heating |
| Force | 230V – 50/60HZ |
| Energy use | <0.3W |
| Working conditions | Temp 0 – 45°C ; humidity <85% |
| Storage conditions | Temp 0 – 55°C ; humidity <95% |
| Temperature options range | 5 – 60°C (Internal sensor) 5 – 99°C (External sensor) |
| Temperature controls range | 5 – 60°C |
| Control accuracy | +/- 1°C |
| Iteam thermo-expandable | Termisor NTC |
| Type of outside material | PC + ABS (Increased thermal resistance) |
| Installation method | Flush-mounted |
| Certificate CE (EMC i LDV) | EN55024, EN61000, EN60950 |
| Certificate RoHs | IEC62321 (Ed.1) |
AC – 4 Connectos TYPE ‘CROCODILE’
USAGE: For making electrical connections heating films
• Clips provide secure and stable connection
• Optimal conductance
• Provides suffciente surface connection
Self- vulcanizing tape (bituminous) 20m:
USAGE: for isolation heating films connections
Length: 20m
Width: 5cm
Thickness 1.5mm
USAGE: For isolation, usually use under films.
Thickness: 5mm
Width: 1m
Roll: 50m
CONTACT US
Email us with any questions or inquiries or call 07913180302.
We would be happy to answer questions and set up a meeting with you.